BASIC "DO'S & DON'TS " OF POR-15
- Don't open the POR-15 can until you are ready to paint.
- Don't paint directly from the POR-15 can, unless you are going to use up all the paint in one session.
- Do wear latex or rubber gloves when working with POR-15. If it dries on your skin, it has to wear off.
- Don't shake up a can of POR-15. Do stir it, like a great Martini
- Do pour out, from original can, only as much paint as you'll use up within 20 minutes.
- Do wipe down lid and rim of original can throughly, and replace lid immediately!
- Don't pour back into original can, the paint you have not used. It will ruin the remaining paint.
- Do make sure surface to be painted is bone-dry. Use a blow dryer if necessary.
- Do use METAL-READY first if you are painting POR-15 on new steel, galvanized metal, aluminum, or any smooth metal surface.
- Do use METAL-READY if your job had to be degreased or cleaned.
- Do use an organic vapor particulate respirator, NIOSH/MSHA approved when spraying POR-15. If you are spraying in an enclosed area, you must use an air-supplied respirator.
- Do apply in thin coats.
- Don't apply POR-15 to a "tacky" surface. Wait until the first coat is dry to the touch before applying a second coat of POR-15.
- Don't mix other paints with POR-15. Never try to add color to POR-15.
- Do topcoat POR-15 with an opaque paint, if left exposed to prolonged sunlight.
- Do store remaining POR-15 (once opened) in a cool, dry location such as a refrigerator.
- Do call your POR-15 Store Representitive Toll Free at 877 548-9323 if you have any further questions or need additional products or information.
 Home | FAQ's | Product Info | Using POR-15 | Contact Us CALL TOLL FREE 1-877-548-9323 Permanent Restoration Products Authorized Distributors of POR-15, Inc. 2701 Beech St., Unit H, Valparaiso, IN 46383 info@prp-porshop.com ©Copyright 2003 |