Home
Do's and Dont's
POR-15 FAQ's
Testimonials
Links
Product Information
Using POR-15

Anti-Rust Coatings
Topcoats
Tie-Coat Primer
Preparation Products
High-Temp Coatings
Fuel System Care
Fillers and Puttys
Restoration Kits
Strippers and Solvents
Appearance Products
Basic Supplies
Specials

Basket Contents
Check Out

About Us
Privacy Policy
Search
Site Map
Free Catalog


Question?
Email Us and
Receive a Prompt Reply
info@prp-porshop.com
PRP-PORShop.com - Authorized Distributor of POR-15 Products


Using POR-15

The POR15 Shop's restoration products are designed to work as a complete system. When used together, these products provide you with a coating that will not only stop rust, but will protect it from returning. To aid you in your particular rusty metal project, we have included the following steps to explain the various stages in rust prevention. All Permanent Restoration's products are available individually or many are available in efficient, cost-saving kits geared to your specific restoration need. Here is how the system works:


Degrease and Cleansurface
Clean the rusty metal surface with MARINE=CLEAN™degreaser/ cleaner. An environmentally safe cleaner, MARINE=CLEAN™ will remove dirt, grease, wax or other contaminants that could interfere with the restoration.

Neutralize Rust - Etch metal
Prepare the rusty metal surface with METAL-READY.As a rust remover, METAL-READY™ will neutralize rust, etch metal for better adhesion, and coat the metal with zinc phosphate to encourage deep chemical bonding of POR-15™ to the base metal and rust.

Apply rust preventivecoating to surface
Seal the rusty metal with POR-15Rust Preventive Coating. As the moisture resistant POR-15™ bonds to the rusty metal, it will form an unbelievably tough, almost ceramic-like finish that will not crack, chip or peel.

Topcoat the surface
Topcoat the metal surface with CHASSICOATBLACK. The semi-gloss black CHASSICOAT BLACK™. provides the frame, chassis or underbody finish desired by most restorers as it protects the underlying POR-15™ from harmful UV light. This step is not always necessary, it really depends on the location of the application.Call 1 877 548-9323 for more details.



Below are the necessary steps to restore your cracked and rusted engine manifolds using POR-15's Manifold Restoration Kit. Kits are available in 3 colors, Factory Manifold Gray, Black Velvet, and POR-20 Brilliant Aluminum. When restoring a set of engine manifold which are already in fairly good condition, applying one of the 3 High Temperature coatings may be all that is necessary. Call 1 877 548-9323 for more details.

Fire Seal 2000


Return to Top
Home | FAQ's | Product Info | Using POR-15 | Contact Us

CALL TOLL FREE 1-877-548-9323

Permanent Restoration Products
Authorized Distributors of POR-15, Inc.
2701 Beech St., Unit H, Valparaiso, IN 46383
info@prp-porshop.com     ©Copyright 2003